Sct Focal Reducer
When you are first buying camera equipment you see a lot of lenses that have IS or VR designations on them. This is the stabilization of Vibration Reduction image or. They mean the same thing except Canon uses the first term and Nikon uses the second. These are mechanisms built in the camera lens to avoid "camera shake." I will discuss how to get rid of camera shake and why I bought an objective VR for myself.
What is the movement of the camera?
When you're holding the camera in his hands and looking through the viewfinder to take your photo, your body is making slight movements. This is a natural thing that your body is always the same for correction, for your muscles to move to help keep your balance. However, because slight movements of the camera. When the camera zooms in on a subject that is within a reasonable distance, these slight movements become more noticeable.
For example. If your hand shakes slightly and turn your camera from an online degree of your address and the subject is 15 feet away, this would correspond to 3.1 inches are added in the direction of camera moves. Now they say that the movement of his hand happened when he took the picture and while the shutter is open. This would blur the image on film or digital image.
How do I prevent my images go blurry?
There are three ways to prevent this.
- Make sure you have a fast enough shutter speed to make your movements of the hand does not affect the image.
- Use a tripod.
- It has a vibration reduction lens or image stabilization.
Each of these methods have their pros and cons. 1. It has a fast enough shutter speeds
Ideally, you want this thing every time. The golden rule is that you need a shutter speed of 1 over the focal length is set its target. So if you is extended to the bottom with 300mm lens, you would like 1 / 300 second aspect of speed or higher (for 1 / 320 in the standard camera). This usually calls (for the average user) the shutter will not be long open enough to make your hand movements notable in the final image if you have steady hands to be able to get a slower speed. The catch here is the willingness to have enough light to expose your image. If half of a bright day you are fine. If it is darker than could have to use a more sensitive film, but this will make your picture to be grainy.
Note: When you see the lens face with the same zoom capability as a target cheaper, look at the maximum aperture for this purpose. Most likely it will be much larger than the cheapest. F/2.8 is common. The lower the number, the greater the aperture can go. This means more than the lamp will rent when taking the photo, so it will be capable of higher speeds shutter.
2. Use a Tri-pod
This is always going to work. Now you can have the shutter open as long as your image you want and not have any confusion (this is assuming that the subject is not moving or moving slowly). Tripods are fussy though. And definitely not work in many circumstances, especially traveling.
3. Use a lens with image stabilization or vibration reduction
This is "meet in the center" as they still need a decent shutter speed, but do not need a tripod and cheaper than a fast lens. Inside the chamber there is a mechanism to adjust the glass lenses slightly to compensate for the movements of his hand. VR IS, and give a closing Speed few stops back. So if you can not get enough light to be 1 / 320 sec shutter speed as in the example above. VR allows you to download to 1 / 125 sec (four full stops in ideal situations). Often, this will give enough light to properly expose the image. VR and IS lens will cost extra but they are still cheaper than buying the lens speed with which he spoke of above. Fast lenses usually do not have much ability to zoom (the limitation of having a large aperture).
The main article is an example of two images. One of them was taken without VR on and the other had VR. This is a picture taken home with my Nikon D70s with Nikon 18-200mm VR.
To summarize. The cheapest solution is to buy a tripod, the second is to buy a lens with IS or VR, and The most expensive is to buy "fast" lenses. I am a casual photographer and use more to travel so that the RV has been the best option for me. If you are with similar needs and want to eliminate the movement of the camera over your photos, then I would recommend looking at VR and IS lenses.
For more stories on the photograph of the author, please check out www.thoughtsfrommylife.com / Category Photography.
The author maintains the site www.thoughtsfrommylife.com.
 |
No items matching your keywords were found.